| Issue |
E3S Web Conf.
Volume 111, 2019
CLIMA 2019 Congress
|
|
|---|---|---|
| Article Number | 04048 | |
| Number of page(s) | 8 | |
| Section | High Energy Performance and Sustainable Buildings, Simulation models and predictive tools for the buildings HVAC, IEQ and energy | |
| DOI | https://doi.org/10.1051/e3sconf/201911104048 | |
| Published online | 13 August 2019 | |
CFD simulation analysis on integrated operation of range-hood and make-up air supply for cooking-generated particulate matter
1 Yonsei University, Department of Architectural Engineering, 50 Yonsei-ro Seodaemun-gu, Seoul, 03722, Republic of Korea
2 Korea Institute of Civil Engineering and Building Technology, 283, Goyang-daero, Ilsanseo-gu, Goyang-si, Gyeonggi-do, 10223, Republic of Korea
* Corresponding author: tkim@yonsei.ac.kr
One of the most important problems of cooking-generated particulate matter (PM) is that it rapidly disperses when the range hood is in operation during cooking. To improve the performance of the range hood and prevent the dispersion of PM, a supply of make-up air equivalent to the airflow rate of the range hood should be provided. In this regard, we place an auxiliary supply system as a make-up supply to solve such problems. The objective of this study is to evaluate the performance of the make-up air supply system and the range hood. To evaluate this system, several case studies were performed involving CFD simulations. The auxiliary supply system is optimized through three types of variables (size of diffuser, distance from the source, and flow angle). An increase in the length of the diffuser causes PM dispersion to decrease. The installation of the diffuser at a certain distance from the emission source is effective in preventing dispersion of cooking-generated PM. In the building analyzed in this study, supplying the make-up air at an angle of 10° was observed to be most effective.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.