| Issue |
E3S Web Conf.
Volume 111, 2019
CLIMA 2019 Congress
|
|
|---|---|---|
| Article Number | 06068 | |
| Number of page(s) | 4 | |
| Section | Sustainable Urbanization and Energy System Integration | |
| DOI | https://doi.org/10.1051/e3sconf/201911106068 | |
| Published online | 13 August 2019 | |
Study on heat transfer performance of geothermal pile-foundation heat exchanger in GSHP system
School of Energy and Environment, Southeast University, Nanjing, 210096, China
* Corresponding author: zqchen@seu.edu.cn
In order to study the heat transfer performance of geothermal pile-foundation heat exchanger in ground source heat pump system (GSHP), the physical models of pile-foundation heat exchanger and heat exchanger group were established. The heat transfer processes of pile-foundation heat exchanger and heat transfer performance was analyzed both in cooling and heating mode. To carry out the simulation of heat transfer process for 3×3 energy piles, an office building located in Nanjing was introduced. The all-year dynamic building load was calculated with DeST, including the cooling period from June to September, the heating period from December to March and two recovery periods. After ten year’s running, the average soil temperature increases in non-equilibrium condition. Study results are approximate to the actual situation and can be used as theoretical basis for the design and application of pile-foundation heat exchanger in GSHP system.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.