| Issue |
E3S Web Conf.
Volume 112, 2019
8th International Conference on Thermal Equipment, Renewable Energy and Rural Development (TE-RE-RD 2019)
|
|
|---|---|---|
| Article Number | 01018 | |
| Number of page(s) | 7 | |
| Section | Thermal Equipments and Processes | |
| DOI | https://doi.org/10.1051/e3sconf/201911201018 | |
| Published online | 20 August 2019 | |
The initiation stage of Food Court Waste during air versus steam gasification processes
University Politehnica of Bucharest, Department of Energy Production and Use, Splaiul Independenţei 313, Romania
* Corresponding author: cora4cora@gmail.com
Using different gasification agents: air and steam, two types of gasification process were performed into a batch reactor at temperature of 750°C and 850°C and atmospheric pressure. The only difference between of the two compared experimental configurations was represented by the gasification agent used in the process. The amount of oxygen introduced into the reactor for air gasification at an ER of 0.3 was computed. Therefore, in the steam gasification process, the same amount of oxygen was introduced, so establishing an unordinary steam to biomass ratio. In this way, the two processes, air vs. steam gasification, were compared, the rest of the process parameters being kept constant. This paper approaches the transitory regimes (initiation stage) of gasification process in order to observe the influence of process temperature and gasification agent on the process run. According to the experimental results, better gas quality is obtained if steam is used as a gasifying agent, yet the conversion and energy efficiencies decreases. By optimizing time residence in steam gasification, process efficiencies may be increased.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.