Issue |
E3S Web Conf.
Volume 113, 2019
SUPEHR19 SUstainable PolyEnergy generation and HaRvesting Volume 1
|
|
---|---|---|
Article Number | 02019 | |
Number of page(s) | 6 | |
Section | Thermal and Electrical Hybrid Systems | |
DOI | https://doi.org/10.1051/e3sconf/201911302019 | |
Published online | 21 August 2019 |
Thermodynamic analysis of a gas turbine combined cycle integration with a high-temperature nuclear reactor
AGH University of Science and Technology, Faculty of Fuels and Energy, Department of Fundamental Research in Energy Engineering, A. Mickiewicza 30, 30-059 Kraków, Poland
* Corresponding author: jaszczur@agh.edu.pl
The recently a large number of various companies from the energy sector have to follow new very restrictive regulations which protect the natural environment against pollution and degradation. At the same time, the efficiency of energy conversion and the cost of energy remain important economic aspects. One of the solutions for today's challenges can be power generation based on Gas Turbine Combined Cycle proposed in this paper which is the most efficient and environmentally friendly cycle. What is more important this solution can be easily integrated with a High-Temperature nuclear Reactor. The proposed in this work systems consist of the reactor combined with a gas turbine as well as steam turbine. The results show that it is possible to obtain for proposed cycle an efficiency higher than 50% which is not only more than could be offered by traditional coal power plant but much more than can be proposed by any other nuclear technology.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.