Issue |
E3S Web Conf.
Volume 113, 2019
SUPEHR19 SUstainable PolyEnergy generation and HaRvesting Volume 1
|
|
---|---|---|
Article Number | 03023 | |
Number of page(s) | 7 | |
Section | Energy Micropolygeneration and Harvesting | |
DOI | https://doi.org/10.1051/e3sconf/201911303023 | |
Published online | 21 August 2019 |
Simulation of the rising of gas bubbles in a pilot-scale external loop airlift photobioreactor
1
University of Genoa, DIME, Via all’Opera Pia 15, 16145, Italy
2
University of Genoa, DICCA, Via all’Opera Pia 15, 16145, Italy
* Corresponding author bagnerini@dime.unige.it
Air-lift reactors offer an interesting option as a microalgae cultivation system, especially for biorefineries. To optimize this application, a precise description of the moving interfaces formed by the liquid and gas phase is critical. In this paper, a coupled Level Set Method (LSM) and finite difference method is used to simulate gas bubbles dynamics in a pilot-scale external loop air-lift photobioreactor in which microalgae are used to capture CO2 from flue gas and to treat wastewater. Numerical simulations are carried out on a rectangular domain representing the section on the vertical axis of the riser. The data employed were either acquired from previous experimental campaigns carried out in the ALR or found in the literature. The rise, shape dynamics and coalescence process of the bubbles of flue gas are studied. The issue of volume loss characteristic of standard LSM is dealt with the conservative level set method. Computation results show good correspondence with the experimental ones.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.