| Issue |
E3S Web Conf.
Volume 124, 2019
International Scientific and Technical Conference Smart Energy Systems 2019 (SES-2019)
|
|
|---|---|---|
| Article Number | 03006 | |
| Number of page(s) | 5 | |
| Section | Automation, Instruments and Control Methods | |
| DOI | https://doi.org/10.1051/e3sconf/201912403006 | |
| Published online | 25 October 2019 | |
Software and hardware solution for digital signal processing algorithms testing
Ogarev Mordovia State University, Saransk, Russia
* Corresponding author: mvtal@mail.ru
The article describes the microprocessor system for various digital signal processing algorithms testing. The development of electric drive control systems is carried out with the usage of modeling systems such as, MATLAB/Simulink. Modern digital control systems are based on specialized digital signal microcontrollers. The present market offers evaluation boards, for example STM32F4DISCOVERY, which enables to connect a microcontroller to a personal computer. It makes possible to use the microcontroller as a part of the mathematical model of the control system. However, the designing of the control system simulation model and the program for the microprocessor is carried out in different programming environments. Thus, the software and hardware solution for testing programs for the microprocessor, which is a part of the control system, is relevant. This article deals with the designing of the modeling method in which the prototype program for the microprocessor is debugged as a part of the electric drive control system simulation model.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.