| Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00004 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/e3sconf/201912600004 | |
| Published online | 30 October 2019 | |
Use of vortex flows for aerodynamic threshing of agricultural crops
1
Federal State Autonomous Educational Institution of Higher Education “Sevastopol State University”,
Sevastopol,
Russian Federation
2
Federal Research Agro-Engineering Center VIM,
1st Institutskiy proezd, 5,
Moscow,
109428,
Russia
* Corresponding author: siver_info@mail.ru
The presence of self-oscillations in the vortex tube allowed threshing of various agricultural crops in it, such as rice, corn, wheat, oats, etc. For aerodynamic threshing of agricultural crops, the following installations were used: for threshing of selection samples, a tube 50 mm in diameter; for threshing corn cobs with a pipe with a diameter of 300 mm, 500 mm and a diameter of 1000 mm; threshing unit (pipes with a diameter of 1.2 ÷ 2 m), an unconventional vortex aerodynamic stand for threshing crops. According to the results of experiments, the threshing parameters are presented.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.