| Issue |
E3S Web Conf.
Volume 126, 2019
International Conference on Modern Trends in Manufacturing Technologies and Equipment (ICMTMTE 2019)
|
|
|---|---|---|
| Article Number | 00014 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/201912600014 | |
| Published online | 30 October 2019 | |
Optimization of parameters of the spraying device at etching of potato tubers
FSBEI HE Kuban State Agrarian University named after I.T.Trubilin,
Krasnodar,
Russian Federation
* Corresponding author: sergey_belousov_87@mail.ru
The article considers the treatment of potatoes with protective and stimulating substances before planting, using a slit-type disperser, a finely dispersed low-volume spray on the surface of the processing object. The article has a research character, which is expressed in the fact that the analysis of methods and means for processing potatoes with protective and stimulating substances, as well as excerpts from the works of leading scientists on the subject under study are promising scientific developments in the form of patent analysis, which provide optimal flow of the technological process, there were shown their shortcomings and solutions to these problems. There was formulated the main problem of general etching constructions. Also, there was specified the technology of potato tubers treatment with protective-stimulating preparation, the description and the course of technological process are cited. As a result of the work done, a constructive scheme of the device for the treatment of tubers with protective and stimulating liquids by means of slit sprayers is proposed. The article also provides the optimization of parameters of a pneumatic slit sprayer for treatment of tubers with protective and stimulating liquids. The conclusions set out the main results achieved so far.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.