Issue |
E3S Web Conf.
Volume 128, 2019
XII International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2019)
|
|
---|---|---|
Article Number | 08005 | |
Number of page(s) | 7 | |
Section | Mixing Devices and Phenomena | |
DOI | https://doi.org/10.1051/e3sconf/201912808005 | |
Published online | 08 November 2019 |
Protection by noise in quarrying activities: test methods comparison of the hearing protection devices efficiency
1
Department of Engineering, Roma Tre University,
Rome,
Italy
2
Department of occupational and environmental hygiene, INAIL,
Monte Porzio Catone (Rome),
Italy
* Corresponding author: gianluca.coltrinari@uniroma3.it
The work operations in the quarry activities are the source of many physical agents such as dust and vibrations but especially noise. This last can have relevant negative effects they cause serious problems for the worker’s health. In order to prevent the hearing loss, the employer must provide to the workers the HPD (Hearing Protection Devices). They are inserted inside the ear following a specific procedure to ensure the maximum protection by the noise. For this reason, the use training represents an essential aspect. Also the material, which the device is made of, can influence strongly the actual noise attenuation. The study is based on tests with different HPD, some made of polyurethane and others by silicone. Two experimental campaigns were carried out under different conditions with the same measurement methodology. The results highlight the importance of the methodology used in the test and the relevant role of the use training.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.