Issue |
E3S Web Conf.
Volume 128, 2019
XII International Conference on Computational Heat, Mass and Momentum Transfer (ICCHMT 2019)
|
|
---|---|---|
Article Number | 09001 | |
Number of page(s) | 7 | |
Section | Advanced Numerical Methods | |
DOI | https://doi.org/10.1051/e3sconf/201912809001 | |
Published online | 08 November 2019 |
Numerical simulation of vortex induced vibrations of a circular cylinder: isothermal and heat transfer cases
Mechanical Engineering Department, Symbiosis Institute of Technology, Symbiosis International (Deemed University),
Pune,
India
* Corresponding author: crsonawane@gmail.com
In this paper, the Fluid Structure Interaction (FSI) problem - vortex induced vibration of a circular cylinder are studied using a numerical method. An accurate Harten Lax and van Leer with contact for artificial compressibility (HLLC-AC) Riemann solver have been used for flow computation. The Riemann solver is modified to incorporate arbitrarily Lagrangian-Eulerian (ALE) formulation in order to take care of mesh movement in the computation, where radial basis function is used for dynamically moving the mesh. Higher order accuracy over unstructured meshes is achieved using quadratic solution reconstruction based on solution dependent weighted least squares (SDWLS). Two flow scenario of 1 Degree of Freedom (DOF) oscillation cases: isothermal and with heat transfer are presented here. The results obtained by the present method are compared with the literature.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.