Issue |
E3S Web Conf.
Volume 132, 2019
XXII International Scientific Conference POLSITA 2019 “Progress of mechanical engineering supported by information technology”
|
|
---|---|---|
Article Number | 01025 | |
Number of page(s) | 10 | |
Section | Engineering and Technology | |
DOI | https://doi.org/10.1051/e3sconf/201913201025 | |
Published online | 22 November 2019 |
Mathematical simulation of separating work tool technological process
1 Faculty of Production and Energy Engineering, University of Agriculture in Krakow, Balicka 116B, 30-149 Krakow, Poland
2 Dmitriy Motornyi Tavria State Agrotechnological University, 72310, Melitopol, Ukraine
3 Kharkiv Petro Vasylenko National Technical University of Agriculture, 61002, Kharkiv, Ukraine
4 Faculty of Mechanics and Power Engineering, Lviv National Agrarian University, 80381, Lviv, Ukraine
* Corresponding author: sylwester.tabor@urk.edu.pl
The article describes the technological process of separation of the heaped-off pile of wheat. A mathematical model in the form of regression equations was obtained based on a full-factor experiment. Using the methods of mathematical analysis, the regression equations were investigated for the highest and lowest values. The values of the factors were obtained, for which the response function has the highest values, then the response surfaces were constructed and analyzed.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.