| Issue |
E3S Web Conf.
Volume 136, 2019
2019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|
|
|---|---|---|
| Article Number | 02029 | |
| Number of page(s) | 4 | |
| Section | Integrated Application of Renewable Energy in Buildings | |
| DOI | https://doi.org/10.1051/e3sconf/201913602029 | |
| Published online | 10 December 2019 | |
Heat Absorption and Release Characteristics on Heat Storage Walls with Different Materials
1 Anhui Jianzhu University, Anhui Advanced Technology Institute of Green Building, Hefei 230601, China
2 Anhui Province Key laboratory of Intelligent Building and Building Energy Saving, Hefei 236200, China
3 Key Laboratory of Huizhou Architecture in Anhui Province, Hefei 236200, China
* Corresponding author: huhaoweihhw@foxmail.com
To analyze the storage performance of the envelope structure, based on the law of conservation of energy, the ANSYS software was employed to perform thermal analysis on three conventional wall materials and phase change materials, and the temperature fields and minimum temperature difference of the walls with different materials were obtained. The heat absorption and release characteristics of different wall materials were studied. Comparing the heat absorption and release characteristics of phase change materials, it was concluded that the phase change materials had better heat storage capacity, which provided a basis for promoting and developing low energy consumption technologies for buildings.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.