| Issue |
E3S Web Conf.
Volume 136, 2019
2019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|
|
|---|---|---|
| Article Number | 02030 | |
| Number of page(s) | 6 | |
| Section | Integrated Application of Renewable Energy in Buildings | |
| DOI | https://doi.org/10.1051/e3sconf/201913602030 | |
| Published online | 10 December 2019 | |
Study on mechanical properties of a new type of prefabricated GRC mold shell
1 School of civil engineering, Anhui Jianzhu University, Anhui Hefei, 230601, China
2 School of civil engineering, Anhui Jianzhu University, Anhui Hefei, 230601, China
3 School of civil engineering, Anhui Jianzhu University, Anhui Hefei, 230601, China
4 School of civil engineering, Anhui Jianzhu University, Anhui Hefei, 230601, China
* Corresponding author: 851737416@qq.com
The GRC formwork structural column adopts the factory-based vertical prefabrication production process, which can reduce the floor space, reduce the formwork loss, speed up the construction progress, promote the full decoration of the prefabricated building, and improve the efficiency of the assembly construction. major. In order to optimize the production process of prefabricated GRC formwork column, the overall stress system of GRC formwork structure is analyzed in the concrete pouring process, and the thickness of GRC formwork, the number of steel hoops and the GRC mode are considered. The influence of the shell cross-section size on the mechanical properties. The research results can provide reference for the optimization and design of prefabricated GRC formwork column production process.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.