Issue |
E3S Web Conf.
Volume 136, 2019
2019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|
|
---|---|---|
Article Number | 03009 | |
Number of page(s) | 5 | |
Section | Energy Conservation Renovation of Green Buildings and Existing Buildings | |
DOI | https://doi.org/10.1051/e3sconf/201913603009 | |
Published online | 10 December 2019 |
The influences of admixtures on the characteristics of pore structure of low-temperature concrete under different curing conditions
1 Civil Engineering Department, Shenyang Urban Construction University, Shenyang, Liaoning Province, 110167, China
2 Fuxin Thermal Housing Development Co., Ltd., Fuxin, Liaoning Province, 123000, China
* Corresponding author’s e-mail: 17392292@qq.com
Based on the construction characteristics in the Northeast China Region under low temperature conditions, this article studies the influences of admixtures without antifreezing agent of different types and amounts on the low-temperature concrete and characteristics of pore structure. The results show that the amount of the admixtures is stable, the compressive strength of concrete under the curing condition of low temperature naturally varying is higher than the strength under the curing condition of constant low temperature while the porosity of the concrete under the curing condition of low temperature naturally varying is lower than the porosity under the curing condition of constant low temperature; The most appropriate curing method for the concrete used in winter construction is the curing method of low temperature naturally varying.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.