Open Access
E3S Web Conf.
Volume 136, 2019
2019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
Article Number 03009
Number of page(s) 5
Section Energy Conservation Renovation of Green Buildings and Existing Buildings
Published online 10 December 2019
  1. LIU, R.Q., LIU, Y., OU, Y. (2012) Study on internal structure formation of low-temperature concrete in early hydration. Concrete, 12:21-23. [CrossRef] [Google Scholar]
  2. HAO, C.W., DONG, M., MO, L.W., LIU, K.W. (2011) Surface modification of fly ash and its effect on strength and autogenous shrinkage of cement pastes. Journal of the Chinese cement society, 39(4):698-702. [Google Scholar]
  3. KURODA, M., WATANABE.T., NARIAKI, T. (2000) Increase of bond strength at interfacial transition zone by the use of fly ash. Cem Concr Res, 2000, 30(2): 253-258. [CrossRef] [Google Scholar]
  4. LIU, J., QI, H., LIU, R.Q. (2009) Influence of curing temperature on the frost-resisitance of low-temperature concrete without antifreeze. Journal of Wuhan university of technology, 31(7):49-51 [Google Scholar]
  5. Fuminori. T., Kwangryul. H. (2000) A study on the concrete using fly ash as a part of fine aggregate [J]. Summaries of Technical Papers of Annual Meeting, 3:253–261. [Google Scholar]
  6. Kwangryul. H, Fuminori. T. (2001) A properties of pore structure on the concrete using fly ash as a partial replacement for fine aggregate. Cement Science and Concrete Technology Japan Cement Association, 52: 86–87. [Google Scholar]
  7. ZHANG, G., LI, G. (2016) Effects of mineral admixtures and additional gypsum on the expansion performance of sulphoaluminate expansive agent at simulation of mass concrete environment. Construction and Building Materials, 113: 970-978. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.