| Issue |
E3S Web Conf.
Volume 136, 2019
2019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|
|
|---|---|---|
| Article Number | 04062 | |
| Number of page(s) | 5 | |
| Section | Urban Public Safety | |
| DOI | https://doi.org/10.1051/e3sconf/201913604062 | |
| Published online | 10 December 2019 | |
Parameter analysis of stability bearing capacity of bottom frame beam for container building
1 China State Construction Development Co., Ltd. Beijing 100037, China
2 China State Construction Engineering Corporation Limited Technical Center, Beijing 101300, China
* Corresponding author’s e-mail: guopenggang@cscec.com
In this paper, the bottom frame beam of container building is analyzed by finite element method, and compared with the experimental results, the accuracy of the model is verified to meet the needs of the analysis. On this basis, by changing the stiffening position of the upper flange, the height of the web, the load layout and the thickness of the wall, the variation of the stability bearing capacity of the bottom frame beam was studied, the control factors affecting the stability bearing capacity of the bottom frame beam were obtained, and the selection suggestions were given.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.