E3S Web Conf.
Volume 136, 20192019 International Conference on Building Energy Conservation, Thermal Safety and Environmental Pollution Control (ICBTE 2019)
|Number of page(s)||5|
|Section||Urban Public Safety|
|Published online||10 December 2019|
Analysis and study on static load test of box girder bridge in mining area under special load
College of Civil Engineering, Southwest Forestry University, Kunming, Yunnan, 650224, China
In order to evaluate the stress condition and working performance of a box girder bridge in a mining area under the special load of 100T, through static load test, the mechanical properties of the bridge under operating conditions were analyzed and studied. Static load test is the stress test of the main beam under the partial and medium load, finally, the measured results are compared with the finite element result. The results show that under the action of various loads, the check coefficient of the bridge strain and the main tensile strain check coefficient was not exceed the standard allowable value 1, the actual working performance of the structure is very good, the maximum relative residual strain was 8.33%, which are not 20% higher than the standard allowable value, the whole bridge is in the elastic deformation stage, meet with the normal use requirements.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.