| Issue |
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
|
|
|---|---|---|
| Article Number | 04006 | |
| Number of page(s) | 5 | |
| Section | Energy Efficient and Green Buildings | |
| DOI | https://doi.org/10.1051/e3sconf/201914004006 | |
| Published online | 18 December 2019 | |
Balancing fittings in a water heating system
1
Peter the Great St. Petersburg Polytechnic University, Polytechnicheskaya 29, 195251 St. Petersburg, Russia
2
N-Systems Corp., Optikov Street 4, 197374 Saint-Petersburg, Russia
* Corresponding author: sasha231296@mail.ru
Energy conservation and improving energy efficiency are priority areas for the development of the global economy. The need to increase the energy efficiency of the engineering equipment of buildings is due to both the requirements to reduce the energy consumption of buildings in general, and the increase in the proportion of energy-consuming climate systems used in modern construction. In large modern office, hotel and residential complexes to achieve the greatest energy efficiency it is necessary to use various technical solutions. The main element of an energy-efficient heating system is regulation. Balancing devices allow to not only balance and tune the system at any time of operational period but also serve as stop valves during reparation and diagnostics. Determination of energy savings bases on the average value heat consumption before and after modernization, depending on the type of installed valves or their combination. The focus of the work is hydraulic calculation of the heating system the authors conduct research on the effect of differently balancing fittings on the hydraulics of the heating system.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.