Issue |
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
|
|
---|---|---|
Article Number | 04005 | |
Number of page(s) | 5 | |
Section | Energy Efficient and Green Buildings | |
DOI | https://doi.org/10.1051/e3sconf/201914004005 | |
Published online | 18 December 2019 |
The effective modes of infrared radiators and heating systems
1
Omsk State Technical University, Omsk, Russian Federation
2
National Research University “Moscow Power Engineering Institute”, Moscow, Russian Federation
* Corresponding author: ptitsyndv@mail.ru
The authors have been researching the effect of polyharmonic currents (complex waveform current) on the characteristics of different types of radiators for a few years. These researches have shown an increase in the energy efficiency of installations with dark and light radiators and the ability to control the harmonic composition of radiation. It is important considering the need to harmonize the frequency characteristics of a radiator with the frequency response of an energy absorbing surface. The object of experimental research are flexible heating tape and installations with dark radiators and their joint operation modes when powered by complex waveform current from a common power source. The purpose of the work is the definition of characteristics of the flexible heating tape and dark infrared radiators when changing the amplitude and frequency of the supply voltage to develop recommendations for the selection of effective modes.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.