Issue |
E3S Web Conf.
Volume 140, 2019
International Scientific Conference on Energy, Environmental and Construction Engineering (EECE-2019)
|
|
---|---|---|
Article Number | 11003 | |
Number of page(s) | 5 | |
Section | Renewable Energy | |
DOI | https://doi.org/10.1051/e3sconf/201914011003 | |
Published online | 18 December 2019 |
Efficiency of use of waste heat energy on the example of Chelyabinsk
1
South Ural State University (National Research University), Chelyabinsk, Russian Federation
2
South Ural State Agrarian University, Chelyabinsk region, Troitsk, Russian Federation
* Corresponding author: girina2002@ mail.ru
We consider the possibility of improving the existing heat-suppling system in Chelyabinsk through the introduction of heat pump technology for the disposal of waste low-grade heat. Sources of information concerning the ways of utilization of waste thermal energy, the principles of work of heat pumps, classification of city sources of waste heat are analyzed. The technique directed to assess the effectiveness of applying heat pumps for each category of city sources of waste thermal energy is designed. The calculated assessment showed that the utilization of waste heat in the conditions of Chelyabinsk will reduce the annual energy of fuel consumption by 2.2 million tons of conventional fuel (24.9%). At the same time, thermal pollution will decrease by 1.5 million tons of equivalent fuel. This effect is possible with the use of heat pumps with a total heat output of 1,145 MW.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.