| Issue |
E3S Web Conf.
Volume 91, 2019
Topical Problems of Architecture, Civil Engineering and Environmental Economics (TPACEE 2018)
|
|
|---|---|---|
| Article Number | 02004 | |
| Number of page(s) | 6 | |
| Section | Energy-Efficient Construction | |
| DOI | https://doi.org/10.1051/e3sconf/20199102004 | |
| Published online | 02 April 2019 | |
3D-flexible intumescent fire protection mesh for building structures
1 Peter the Great St. Petersburg Polytechnic University, 29 Politekhnicheskaya St., St. Petersburg, 195251, Russia
2 Saint Petersburg State University of Architecture and Civil Engineering, Vtoraya Krasnoarmeiskaya str. 4. St. Petersburg, 190005, Russia
* Corresponding author: YannaSimnna98@mail.ru
The increased operational properties, main of which - ensuring fire resistance in the conditions of the hydrocarbon mode of the fire, resistance to low temperatures and lack of wet processes at installation are necessary for means of fire protection of structures of buildings and constructions of an oil and gas complex. The review of means of fire protection of new type - the constructive bent fire protection which advantage is the set of positive characteristics as constructive fire protection (a plate, a shell, etc. with dry process of installation), and coverings is submitted (plasters, epoxy structures, etc. with wet process of installation). Domestic experts (LTD Promizol, Moscow) developed the constructive bent fire protection for increase in building constructions of buildings and constructions of an oil and gas complex keeping operational properties in the conditions of the Arctic climate. Means of fire protection represents a grid with 3D - the reinforced structure. The closest analogy are products of the Hapuflam GmbH and FLAMRO companies, but at the moment there are no data on a possibility of use in the conditions of the Arctic region for protection of bearing structures and cable systems.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.