Issue |
E3S Web Conf.
Volume 92, 2019
7th International Symposium on Deformation Characteristics of Geomaterials (IS-Glasgow 2019)
|
|
---|---|---|
Article Number | 07002 | |
Number of page(s) | 6 | |
Section | Behaviour of Unsaturated Geomaterials | |
DOI | https://doi.org/10.1051/e3sconf/20199207002 | |
Published online | 25 June 2019 |
Effect of water infiltration on the mechanical behaviour of unsaturated soil
1
Departmen of Civil & Environmental Engineering, Saitama University, Japan
2
National Engineering Services Pakistan (NESPAK), Lahore, Pakistan
* Corresponding author: ali_eng@hotmail.com
Natural slopes and embankments are generally unsaturated in nature with negative pore water pressure adding to the shear strength and hence the stability of the slopes. During the event of rainfall, pore water pressure becomes less negative or even positive as a result the shear strength of soil decreases and failure occur. Therefore, the strength and deformation characteristics for unsaturated soil become important when analysing the stability of these types of slopes. In this study, a triaxial test apparatus was used to study the effect of water infiltration on the mechanical behaviour of unsaturated soil. The test results show that water infiltration decreased with increase in net confining stress and the stress paths were independent of the matric suction, the net confining stress and the shearing conditions for the present experimental study.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.