Issue |
E3S Web Conf.
Volume 92, 2019
7th International Symposium on Deformation Characteristics of Geomaterials (IS-Glasgow 2019)
|
|
---|---|---|
Article Number | 17005 | |
Number of page(s) | 6 | |
Section | Physical Modelling | |
DOI | https://doi.org/10.1051/e3sconf/20199217005 | |
Published online | 25 June 2019 |
Inclined model experiment and discrete element method simulation of reinforced soil wall with leakage of backfill material
1
Public Works Research Institute, Tsukuba, Japan
2
The University of Tokyo, Institute of Industrial Science, Tokyo, Japan
* Corresponding author: t-nitta44@pwri.go.jp or takehiko.nitta@terre-1.co.jp
In this study, a series of inclined model experiments were conducted to investigate the behaviour of reinforced soil walls with leakage of backfill material. The experimental results were simulated by discrete element method (DEM). From the results of the inclined model experiments, it was confirmed that the tensile force in the reinforcement near the wall facing decreased due to the leakage of the backfill material, while decreasing the horizontal resistance of the reinforced soil wall remarkably. The leakage behaviour observed in the experiment was simulated using DEM. From the results of the DEM simulation, the calculated displacement pattern was found to be roughly similar to that obtained in the experiment. During leakage of the backfill material, an area without normal contact forces was generated at the lower end and this area developed toward the upper side. Such a change in normal contact forces affects the behaviour of a geogrid, in particular the disappearance of normal contact forces weakens the interlocking between the geogrid and the soil. This observation agrees with the experimental finding that the strain of the geogrid decreased in the area near the back of the wall facing.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.