| Issue |
E3S Web Conf.
Volume 145, 2020
2019 International Academic Exchange Conference on Science and Technology Innovation (IAECST 2019)
|
|
|---|---|---|
| Article Number | 02065 | |
| Number of page(s) | 4 | |
| Section | International Conference on New Energy Science and Environmental Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202014502065 | |
| Published online | 06 February 2020 | |
Effects of Different Pre-processing Methods on Dry Anaerobic Fermentation of Sugarcane Leaves and Pig Manure
Institute of Agricultural Machinery, Chinese Academy of Tropical Agricultural Sciences (CATAS), Zhanjiang 524091, China
* Corresponding author’s e-mail: eddweiss@163.com
Using agricultural wastes for anaerobic fermentation to produce biogas can not only realize the resource utilization of the wastes, but also prevent the environmental issues caused by straw burning. Sugarcane leaves contain waxy layer, which will cause problems such as difficulty in degradation, long-time fermentation and low biogas production. This paper studies the effects on three pre-processing methods of adding rush rot agent, natural retting for 7 days and water moisture for 24 hours of dry anaerobic fermentation of sugarcane leaves and pig manure. The results show that natural retting for 7 days has the advantage of daily biogas production when the fermentation period is less than 20 days, but this method is not obviously different from that of water moisture for 24 hours. When taking total biogas production volume and volume loading rate as the indicators, water moisture for 24 hours is the best pre-processing method for dry anaerobic fermentation of sugarcane leaves and pig manure when the fermentation period is more than 20 days.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.