| Issue |
E3S Web Conf.
Volume 164, 2020
Topical Problems of Green Architecture, Civil and Environmental Engineering 2019 (TPACEE 2019)
|
|
|---|---|---|
| Article Number | 03011 | |
| Number of page(s) | 7 | |
| Section | Energy Efficiency in Transportation | |
| DOI | https://doi.org/10.1051/e3sconf/202016403011 | |
| Published online | 05 May 2020 | |
The influence of grooving corrosion on the strength of pipelines
Tyumen Industrial University, 38, Volodarskogo Str., 625000, Tyumen, Russia
* Corresponding author: ts-z@yandex.ru
The aim of the present work is to develop a model of grooving corrosion of the pipeline using APM WinMachine program. Corrosion is caused by chemical reaction of the metal with the environment (outside) and the transported product (inside) undergoing on the boundary of the metal and the media. This issue is widely investigated in multiple national and foreign studies; however, it is still relevant nowadays. This paper presents results of calculation of the stress-strain state of two segments of the pipeline with the given parameters. Engineering calculations were carried out using the finite element method. The stress maps were built based on the calculated models of pipelines.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.