| Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
|---|---|---|
| Article Number | 03040 | |
| Number of page(s) | 4 | |
| Section | Geology, Mapping, and Remote Sensing | |
| DOI | https://doi.org/10.1051/e3sconf/202016503040 | |
| Published online | 01 May 2020 | |
Discussion on the Optimization of Injection and Production Parameters in the Western Fault Zone of T Zone
1 The 3rd Oil Production Factory, Daqing Oil Field Company Ltd, Daqing, China
This article mainly applies the injection-production balance board, combining the dynamic experience of oilfield development to optimize the adjustment method of injection and production parameters in fault area. Based on the law of material balance, considering the pressure limit of the fault plane and the dynamic data of development wells on both sides of the fault, by drawing the pressure balance chart of the injection and production system, the equilibrium formation pressure on both sides of the fault can be calculated. The adjustment direction is given based on the current injection and production status, so as to establish the injection and production parameter adjustment method in the study area.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.