| Issue |
E3S Web Conf.
Volume 165, 2020
2020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|
|
|---|---|---|
| Article Number | 05015 | |
| Number of page(s) | 5 | |
| Section | Chemical Engineering and Materials Science | |
| DOI | https://doi.org/10.1051/e3sconf/202016505015 | |
| Published online | 01 May 2020 | |
Research on the Properties of High-strength Gypsum Based Tile Adhesive in Interior Decoration
National Key Laboratory of Solid Waste Resource Utilization and Energy-saving Building Materials Beijing Building Materials Academy of Sciences Research, Beijing, 100041, China
* Corresponding author: 13811802011@139.com
In this paper, a new early strength tile adhesive is prepared by using α- high strength gypsum and its properties are discussed. The research methods refer to relevant Chinese standards. The results show that the tensile bond strength of the adhesive can reach 0.6 MPa in one day and 1.5 MPa in 7 days, which is close to 80% of 28-day strength. It is indicating that the adhesive has high bond strength, rapid strength development, and high dimensional stability. It effectively solves the problems that the traditional cement-based tile adhesive is prone to hollowing, falling off, and cracking. Additionally, no interface treatment is required during the using process of this gypsum-based adhesive.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.