E3S Web Conf.
Volume 165, 20202020 2nd International Conference on Civil Architecture and Energy Science (CAES 2020)
|Number of page(s)||4|
|Section||Chemical Engineering and Materials Science|
|Published online||01 May 2020|
Performance Study on the Bonding Mortar for Prefabricated Light Weight AAC Composite Board
National Key Laboratory of Solid Waste Resource Utilization and Energy-saving Building Materials Beijing Building Materials Academy of Sciences Research, Beijing, 100041, China
* Corresponding author: firstname.lastname@example.org
In this paper, the tensile bond performance of different bonding mortars for lightweight composite boards of autoclaved aerated concrete which can be prefabricated in factory is studied. The performance requirements of bonding mortar for the composite boards are proposed. The research methods refer to relevant Chinese standards. The results indicate that the tensile bond strength of bonding mortars for the lightweight aerated concrete substrates varies with the curing age increasing. The special bonding mortar for prefabricated composite board of light weight aerated concrete should have the characteristic of early and relatively high strength in a short curing age. And its early tensile bond strength should not be less than 0.35MPa in 3 hours.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.