| Issue |
E3S Web Conf.
Volume 168, 2020
II International Conference Essays of Mining Science and Practice
|
|
|---|---|---|
| Article Number | 00064 | |
| Number of page(s) | 11 | |
| DOI | https://doi.org/10.1051/e3sconf/202016800064 | |
| Published online | 06 May 2020 | |
Technological solutions for mining of off-balance gypsum reserves in difficult geological conditions
1
Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine, 49005, Dnipro, Simferopolska Str., 2a, Ukraine
2
Additional Liability Company “Siniat”, 84500, Bakhmut, Lomonosov Str., 3, Ukraine
3
ECE Cogemacoustic, 87022, Limoges, route du Palais, 42, France
* Corresponding author: ser1953@meta.ua
Mining technological solutions for underground mining of offbalance gypsum reserves in difficult mining and geological conditions were justified. An analysis of typical geological disturbances of gypsum seams is carried out using the Artemivsk deposit (Ukraine) as an example. Physical and mechanical properties of rocks in disturbed zones are determined. A quantitative assessment of strength characteristics of rocks during their moistening is carried out. The minimum permissible values of the width of the tape pillar and the power of the protective stack above the camera in the presence of a violation in the roof are calculated. The use of selective mining of the lower part of the seam by combines of the “Roadheader” type is recommended. The maximum width and height of the chamber are determined by the type of combine. The technology has been tested and realized at the gypsum mine of the Additional Liability Company “Siniat”.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.