Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
---|---|---|
Article Number | 01007 | |
Number of page(s) | 5 | |
DOI | https://doi.org/10.1051/e3sconf/202018401007 | |
Published online | 19 August 2020 |
IOT based solar energy prophecy using RNN architecture
1 Associate Professor, Dept of EEE, GRIET, Hyderabad, India
2 Professor, Dept of IT, GRIET, Hyderabad, India.
3 Assistant Professor, Dept of IT, GRIET, Hyderabad, India.
4 UG student, Dept of IT, GRIET, Hyderabad, India
* Corresponding author: vijayram_v@yahoo.com
It is the 21st century and scientists say that by the end of this century, resources will be replenished and the only way the future generations can access energy is through renewable resources— those which are inexhaustible. One such source is sunlight, which has a guaranteed stay in the long run. The energy thus given is termed as solar energy. In the present paper it is tried to solve the issue of limited resources and their adverse effects. Since the power generated from solar energy systems is highly variable, due to its dependence on meteorological conditions, an efficient method of usage of this fluctuating but precious energy source has to come in picture. This requires the scope of reliable forecast information as the development of predictive control algorithms for efficient energy management and monitoring for residential grid connected photovoltaic systems. The paper has given an overview of different applications and models for solar irradiance and photovoltaic power prediction, including time series models based on live measured data from rooftop solar power plant located at 17.5203° N, 78.3674° E. For experimentation, data collected over four years from the solar power plant was used in order to the train machine and understand the characteristics of the solar power plant and gives the predicted energy as the result. The use of Deep Learning is done where LSTM is used for the training and keras and tensorflow are used for obtaining the result. The mean square error thus obtained is 0.015.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.