E3S Web of Conferences

Open Access

Preface 00001

Suresh Kumar Tummala, Satyanarayana Kosaraju, Phaneendra Babu Bobba and Swadesh Kumar Singh

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018400001

Open Access

Formation of Multiple Phase Microstructure and Wear Investigation on Treated AISI 904L SS by Low Temperature Ion Nitriding Process 01001

Ram. Subbiah, N. Sateesh, S.K Singh, S. Ravi Sekhar, B. Tanya and A. Anitha Lakshmi

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401001

Open Access

Structure and Topography Modifications of Treated AISI 316LN Stainless Steel Surfaces after Friction in Dry Sliding Contact by Case Hardening Process 01002

M. Mamatha Gandhi, Animesh Bain, P Rohith, R. Srilatha and Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401002

Open Access

New Insights of Wear Behavior Analysis on Low Temperature Treated AISI 253MA Stainless steel Material by Gas Nitriding Process 01003

K. Ramya Sree, G. Keerthi Reddy, K. Aishwarya, E. Nirmala Devi and Ram. Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401003

Open Access

Anisotropy Study of Inconel 718 alloy at Sub-Zero temperatures 01004

L Jayahari, K Nagachary, Chandra Ch Sharath and SM Hussaini

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401004

Open Access

Influence of Process Parameters on Physical and Mechanical Parameters of Friction Surfaced Deposits on Low Carbon Steel 01005

S. Ravi Sekhar, D. Govardhan, R Karthikeyan and Ram Subbaiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401005

Open Access

Investigation of Microstructure and Mechanical Properties of Austenite Stainless Steel 304 during Tempering and Cryogenic Heat Treatment 01006

Anitha Lakshmi, Swathi, Tanya Buddi, Ch. Bandhavi and Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401006

Open Access

IOT based solar energy prophecy using RNN architecture 01007

V. Vijaya Rama Raju, N V Ganapathi Raju, V Shailaja and Sugandha Padullaparti

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401007

Open Access

Processing parameters Optimization of Injection Moulding in DN20 Vent of Water Meter Manufacturing 01008

N. Sateesh, S. Devakar Reddy, Ram Subbiah, D. Siva Nagaraju and BCh Nookaraju

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401008

Open Access

Dynamics and an efficient malware detection system using opcode sequence graph generation and ml algorithm 01009

Bharathi Panduri, Madhurika Vummenthala, Spoorthi Jonnalagadda, Garwandha Ashwini, Naruvadi Nagamani and Amanagati Akhila

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401009

Open Access

Driving license detection using QR code 01010

Bhavani Ratakonda, Ajay Therala and Chanikya Kumar Hanumanthu

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401010

Open Access

A Comparative Study using Feature Selection to Predict the Behaviour of Bank Customers 01011

Sreethi Musunuru, Mahaalakshmi Mukkamala, Latha Kunaparaju and N V Ganapathi Raju

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401011

Open Access

Comparison of GAN, SIC, SI Technology for High Frequency and High Efficiency Inverters 01012

Sai Kiran Pullabhatla, Phaneendra Babu Bobba and Satyavani Yadlapalli

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401012

Open Access

Taguchi Optimisation In Machining EN18 Using Coated Tool Under Dry and MQL Condition 01013

Kosaraju Satynarayana, Are Swathi, Kesari Neeraja, Madipali Samaikhya and Kumkuma Rajkiran

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401013

Open Access

Experimental Studies on Machining EN45 Steel under Dry and MQL using Uncoated Inserts 01014

Kosaraju Satynarayana, Gayam Sreenivas Reddy, Chitimilla Srikar, Janaswami Gnyaneshwar, Yedla Shyam Prasad and Kumkuma Rajkiran

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401014

Open Access

Impact of Nano additives on optimized Mahua Bio-diesel Performance 01015

U. S. Jyothi and G. Jeevan Kumar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401015

Open Access

A Fractional Order Control Strategy for LFC via Big Bang Big Crunch & Grey Wolf Optimization Algorithms 01016

Dola Gobinda Padhan, Syed Sarfaraz Nawaz and Padmanabhuni Ravikanth

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401016

Open Access

Role of Big Data Analytics in Power System Application 01017

Ravi V Angadi, P. S Venkataramu and Suresh Babu Daram

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401017

Open Access

Investigation of Mechanical Properties of AISI 316 Stainless Steel by Carbonitriding Process 01018

A Rohit Sai Krishna, B Vamshi Krishna, D Harshith, T Sashank and Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401018

Open Access

Improving the Mechanical Properties of AISI 2205 Duplex Stainless Steel by Cryogenic Treatment Process 01019

Shivani Koppula, Aakula Rajkumar, Siram Hari Krishna, Reddi Sai Prudhvi, S. Aparna and Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401019

Open Access

Assessment of Properties on AISI430 Ferritic Stainless Steel by Nitriding process 01020

Lakshmi Deepak Tadepalli, Ananda Mithra Gosala, Lokesh Kondamuru, Sai Chandra Bairi, A. Anitha Lakshmi and Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401020

Open Access

Evaluation of properties of AISI 431Grade Stainless Steel by Vacuum Annealing Process 01021

Gandla Lakshmi Prasanna, G. Keerthi Reddy and Dr. Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401021

Open Access

Assessment of AISI 431Grade Stainless Steel properties by Vacuum Tempering Process 01022

Gandla Lakshmi Prasanna, J Saranya and Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401022

Open Access

IMPROVEMENT OF CHARACTERISTICS OF AISI 310 GRADE STAINLESS STEEL MATERIAL BY CARBURIZING 01023

Manne Vamshi, J. Saranya and Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401023

Open Access

Wear Characteristics of AISI 310 Grade Stainless Steel Material by Carbonitriding Process 01024

Manne Vamshi, Animesh Bain, M. Sreekanth and Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401024

Open Access

Analog to Digital Converters (ADC): A Literature Review 01025

Hemlata Dalmia and Sanjeet K. Sinha

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401025

Open Access

Experimental investigations and optimization of process parameters of meshed-wick heat pipe 01026

B.Ch Nookaraju, B. Hemanth Sai, K.V.N.S Himakar, N. Limba Reddy and N Sateesh

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401026

Open Access

Turbulent fluid flow and heat transfer analysis of heated rectangular blocks encountered in electronics enclosures 01027

B Ch Nookaraju

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401027

Open Access

Optimization of Metal Inert Gas Welding Process during Joining of Structural Steels- An Overview 01028

Ravindra Kumar Misra and Rajesh Kumar Porwal

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401028

Open Access

Effect of permeability on GFRP laminate produced by VARTM process 01029

Bairoju Shankarachary, N Sateesh, Lavu Gopinath and Siripuram Aparna

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401029

Open Access

A Review on Comparison of Mechanical Properties of Dissimilar Steels Welded By TIG and MIG 01030

D. Suresh Kumar and Pendem Srikar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401030

Open Access

A comprehensive study to select suitable method to enhance mechanical properties during 3D printing of metallic materials 01031

Utkarshika Chandra and Rajesh Porwal

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401031

Open Access

FEM Analysis of Robotized Arc Welded Joint 01032

Anas Islam, Vijay Dwivedi and Kamal Sharma

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401032

Open Access

A Review on Mechanical and Thermal Properties of Aluminum Metal Matrix Composites 01033

K. Sunil Kumar Reddy, M. Kannan, R. Karthikeyan, S. Prashanth and B. Rohith Reddy

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401033

Open Access

Scope of Intelligence Approcahes for Unit Commitment Under Uncertain Sustainable Energy Environment For Effective Vehicle To Grid Operations-A Comprehensive Review 01034

Dinesh Dhawale and Vikram Kumar Kamboj

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401034

Open Access

Design of Flying Capacitor Multilevel Inverter for Solar Energy Applications 01035

Nitin Pawar, Vijay Kumar Tayal and Pallavi Choudekar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401035

Open Access

Formability Studies of Automotive Aluminium Alloy Sheet series: A Review 01036

Anitha Lakshmi, Tanya Buddi, Ram Subbiah and Ch. Bandhavi

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401036

Open Access

Optimizing Tool Path Sequence Of Plasma Cutting Machine Using TSP Approach 01037

Shreeyash Sonawane, Pallavi Patil, Ramkrishna Bharsakade and Pankaj Gaigole

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401037

Open Access

Design of TID controller based on firefly algorithm for controlling the speed of a D.C. Motor 01038

Govind Kumar Rajput, Adesh Yadav, Ajay Kumar, Abhishek Gautam, Anand Tiwari, Naladi Ram Babu and Tirumalasetty Chiranjeevi

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401038

Open Access

Optimization of post weld heat treatment cycle of fiber laser welded bainitic steel 01039

VSM Ramakrishna R and JP Gautam

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401039

Open Access

Weldability, Mechanical Properties and Microstructure of Nickel Based Super Alloys: a review 01040

S. Sravan Sashank, S. Rajakumar, R. Karthikeyan and D. S. Nagaraju

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401040

Open Access

Performance Investigation of Grid-Connected DFIG using Integrated Shunt Active Filtering Capabilities 01041

Krishna S. Patel and Vijay H. Makwana

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401041

Open Access

Sustainability aspects in the warm forming of tailor welded blanks 01042

V.V.N. Satya Suresh, A. Suresh, S.P Regalla, P.V Ramana and O. Vamshikrishna

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401042

Open Access

Relay Feedback Identification based Load Frequency Control and Controller Design 01043

Kunduru Laxmi Pavan Kumar Reddy and Dola Gobinda Padhan

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401043

Open Access

A Review on Intelligent Fault Detection in Rolling Element Bearings 01044

Robin Raj Balraj, Madhavi Barla and Govardhan Tingarikar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401044

Open Access

Powder Metallurgy Techniques for Titanium Alloys-A Review 01045

Pradeep Kumar Manne, Nutenki Shravan Kumar, Tanya Buddi, A. Anitha Lakshmi and Ram Subbiah

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401045

Open Access

Optimization of TriboelectricNanogenerator for Small Power Electronics 01046

Jashan Kumar Mainra, Akshpreet Kaur and Gaurav Sapra

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401046

Open Access

Emerging trend in manufacturing of 3D biomedical components using selective laser sintering: A review 01047

Pankaj Kumar and Gazanfar Mustafa Ali syed

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401047

Open Access

Taguchi optimisation of Turning Inconel 600 under dry and MQL condition using uncoated Tool 01048

Kosaraju Satynarayana, Aki Ruthwik, S Siddhartha, NV Dharma Teja, KSV Phanindra and Kumkuma Rajkiran

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401048

Open Access

An Approach for Future-Oriented Framework Design: A Tool for Design Research 01049

Akhilesh Kumar Singh, Giri Vijay Temmanaboina, Prasanth Gummalla and Pramod Kumar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401049

Open Access

A Survey on a Nonlinear Regression Application to Machine Learning Techniques for Geomagnetic Data Reconstruction Processing 01050

Chimata Komala and Dr.K Butchi Raju

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401050

Open Access

Study and Optimisation of Process Parameter in Turning Of EN 45 - Spring Steel Material Under Dry And MQL Conditions 01051

Kosaraju Satynarayana, Kumkuma Rajkiran and Kalemula Sai Kiran

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401051

Open Access

A Survey of DDOS Attacks Using Machine Learning Techniques 01052

M Arshi, MD Nasreen and Karanam Madhavi

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401052

Open Access

A Survey on Big Five Personality Traits Prediction Using Tensorflow 01053

Manisha Nilugonda and Dr. Karanam Madhavi

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401053

Open Access

CFD Analysis of a Solid Propellant Retro Rocket Motor using Ansys Fluent 01054

Varada Anil Hemanth and U.S Jyothi

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401054

Open Access

Adoption of Multilevel Inverter based Dynamic Voltage Restorer for Power Quality Improvement with Adjustable DC-Link 01055

Kummari Geethika, Vinay Kumar Awaar and Praveen Jugge

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401055

Open Access

A review on Mechanism of fluid flow and Transfer of Heat in Closed Loop Pulsating Heat Pipe 01056

Venkata Suresh Javvadi, Bhramara Panitapu, Rajith Gangam and Hrishikesh Kulkarni

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401056

Open Access

DSP based Voltage Source Inverter for an application of Induction Motor control 01057

Venu Gopal Mangali, Shravan Kumar P, Vinay Kumar Awaar and Praveen Jugge

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401057

Open Access

Aerodynamic analysis of railway wagon on drag coefficient 01058

M. Bhagya Lakshmi Nageswari and Dr.U.S. Jyothi

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401058

Open Access

Structural Health Monitoring (SHM) of Machine Using a Combination of Non-Destructive Testing for Heavy Manufacturing Industry 01059

Ashish Khaira, Ravi. K. Dwivedi and Sanjay Jain

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401059

Open Access

Experimental investigation in machining EN18 using coated tool under dry and MQL condition 01060

Kosaraju Satynarayana, Kumkuma Rajkiran and Kalemula Sai Kiran

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401060

Open Access

A Survey on Hybrid Machine Translation 01061

Anusha Anugu and Gajula Ramesh

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401061

Open Access

Functional safety requirements of traction inverter in accordance to ISO 26262 01062

R Bhavana, Omsekhar Indela and Mohammed Sajid Yaragatti

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401062

Open Access

Review on Laminated Busbars used in High Frequency Inverters 01063

Chirisavada Jagadeesh, Gajala Himavarsha and Bobba Phaneendra Babu

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401063

Open Access

CODE2VEC Based Cognitive Agent System to Retrieve Relevant Code Component from Repository 01064

Meghna Talari, Krishna Chythanya N and C.R.K Reddy

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401064

Open Access

Speed Control of Dual Induction Motor Using Five Leg Inverter 01065

Gayatri Chavan and Sridhar. S

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401065

Open Access

Smart Privacy Protection for Location-Based Services using Queueing Modelling 01066

Chamana H Ram Sai Jeetesh, Yerubandi Sai Sriram, Kavitha Kayiram and V.N. Rama Devi

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401066

Open Access

A Role of cryogenic in Wire cut EDM process 01067

Kosaraju Satynarayana, Kumkuma Rajkiran, Pujari Anil kumar and D Chakradhar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401067

Open Access

ANN based Battery Health Monitoring - A Comprehensive Review 01068

Sai Vasudeva Bhagavatula, Venkata Rupesh Bharadwaj Yellamraju, Karthik Chandra Eltem, Phaneendra Babu Bobba and Naveenkumar Marati

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401068

Open Access

An Effective Solution to Single-Area Dynamic Dispatch Using Improved Chimp Optimizer 01069

Ch. Leela Kumari and Vikram Kumar Kamboj

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401069

Open Access

A New Solution to Profit Based Unit Commitment Problem Considering PEVs/BEVs and Renewable Energy Sources 01070

Ayani Nandi and Vikram Kumar Kamboj

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401070

Open Access

A Cost Effective Solution to Security Constrained Unit Commitment and Dispatch Problem using Hybrid Search Algorithm 01071

Sushil Prashar, Vikram Kumar Kamboj and Kultaar Deep Singh

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401071

Open Access

Dynamic force signal analysis in dry finish turning of Aluminium metal matrix composites 01072

Srinivasa Rohit. V, Venu Gopal Anne and Ramakrishna L

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401072

Open Access

Model Predictive Controller based Unified Power Quality Conditioner for Voltage Regulation Studies in 33- Bus Closed Loop Distribution System 01073

SK. Abdul Pasha and N. Prema Kumar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401073

Open Access

Configurations and Control Strategy of a Single Stage Grid Connected PV System 01074

K. Rajasekhara Reddy, V.Nagabhaskar Reddy, M.Vijaya Kumar and Suresh Kumar Tummala

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401074

Open Access

7-Level Semi Cross Switched Multilevel Inverter Fed Induction Motor Drive 01075

Srinivas Rao Janiga and Suresh Kumar Tummala

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401075

Open Access

Performance evaluation of nano-silica concrete 01076

Kakara S J Kumar, M V Seshagiri Rao, V Srinivasa Reddy and S Shrihari

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401076

Open Access

Flexural behaviour of steel fibre reinforced concrete beams made with copper slag as partial fine aggregate replacement 01077

DAS Mohd Areef, P Srinivasa Rao, V Srinivasa Reddy and D Mohd Azeem Zubair

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401077

Open Access

Behaviour of the water tank staging with aluminum and steel X-plate damper 01078

G. Nirmala and Atulkumar Manchalwar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401078

Open Access

Compatibility Assessment of Commercial Cements with superplasticizers 01079

S Shrihari, M V Seshagiri Rao, V Srinivasa Reddy and Amandu Manasa

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401079

Open Access

Geo-polymerization mechanism and factors affecting it in Metakaolin-slag-fly ash blended concrete 01080

A D Sandeep Kumar, Dinesh Singh, V Srinivasa Reddy and Kaveli Jagannath Reddy

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401080

Open Access

Stress-Strain behaviour of basalt fibre reinforced concrete 01081

E Giri Prasad Goud, Dinesh Singh, V Srinivasa Reddy and Kaveli Jagannath Reddy

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401081

Open Access

Electrical Resistivity and Half-Cell Potential Studies to assess organic and inorganic corrosion inhibitors’ effectiveness in concrete 01082

V Srinivasa Reddy, K Satya Sai Trimurty Naidu, M V Seshagiri Rao and S Shrihari

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401082

Open Access

A Sustainable Study on Permeable Concrete using Bagasse Ash and Rice Husk Ash as a Partial Replacement of Cement 01083

Dr. Vanathi, Dr.K Radhika and Ms. G. Swetha

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401083

Open Access

Feasibility Study of Recycled Plastic Waste as Fine Aggregate in Concrete 01084

K. Sai Gopi, Dr. T. Srinivas and S. P. Raju V

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401084

Open Access

Effect of Recycled Aggregates on Strength and performance of Recylced Aggregate Concrete 01085

Dr.V. Mallikarjuna Reddy and M. Manikanta Sai Swaroop

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401085

Open Access

Smart Concrete Curing System 01086

Dr.V. Mallikarjuna Reddy and S. Hamsalekha

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401086

Open Access

Experimental Investigation on Design of Thickness for Flexible Pavement Subgrade Soils using CBR Approach 01087

Y. Kamala Raju and C. Vivek Kumar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401087

Open Access

Behavior of Monotonic Loading for Glass Fibre based High Performance Concrete in External Beam-Column Joint using ANSYS. Analysis 01088

C Vivek Kumar, Patam Manisha and Pooja Sadula

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401088

Open Access

EXPERIMENTAL INVESTIGATION ON FOAM CONCRETE WITH PARTIAL REPLACEMENT OF FINE AGGREATE BY FLY ASH AND CEMENT BY ALCCOFINE 01089

Dr.G.V.V. SATYANARAYANA and G. PRAVEEN KUMAR

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401089

Open Access

Effect of Review elevated temperature on geo-polymer concrete – A Review 01090

V Chandrakanth and Srikanth Koniki

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401090

Open Access

Mechanical Properties and Mix Design of Geopolymer concrete – A review 01091

Vemundla Ramesh and Dr.Koniki Srikanth

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401091

Open Access

Effect of Durability properties on Geopolymer concrete – A Review 01092

M Niveditha and Srikanth Koniki

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401092

Open Access

Experimental Investigation on Workability and Density of Medium-Range Foam Concrete with Hybrid Fibers 01093

Dr. G.V.V. Satyanarayana and G. Mahesh

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401093

Open Access

Foundation Types for Land and Offshore Sustainable Wind Energy Turbine Towers 01094

C Lavanya and Nandyala Darga Kumar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401094

Open Access

A Review on Geopolymer RCC Beams made with Recycled Coarse Aggregate 01095

T Srinivas., G Abhignya. and N.V Ramana Rao.

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401095

Open Access

A Review on Flexural Behavior of RCC Beams Made with Geopolymer Concrete 01096

Dr. T. Srinivas, S. V. Srinidhi and Dr. N.V. Ramana Rao

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401096

Open Access

Comparison of Seismic isolation with isolator and Soil structure Interaction U-shaped metallic isolator and Soil structure Interaction 01097

G. Jyothi Sravya and A. Manchalwar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401097

Open Access

Investigation on Workability Of M20 Grade Concrete With Partial Replacement Of Crumb Rubber And M Sand For Fine Aggregates And Flyash For Cement 01098

P.Santhi Raj, G.V.V. Satyanarayana and M. Sriharshavarma

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401098

Open Access

Performance of 2-D Frame Equipped With Base isolation System under Dynamic Loadings 01099

N. Omprakash Reddy and A. Manchalwar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401099

Open Access

Strength Behaviour of Blended Self Cured Concrete made with Cement by partial replacement of Supplementary Cementitious Materials (SCM’s) 01100

C Vivek Kumar, MD Aiman Parvez and T Srinivas

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401100

Open Access

Effect of Manufactured Sand on Flexural Behavior of Geopolymer RCC Beams: A review 01101

T. Srinivas, P. Bhavana and N. V. Ramana Rao

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401101

Open Access

Prediction of strength and durability properties of HPC composites using Adaptive Neuro-fuzzy Inference System 01102

P Magudeaswaran., C. Vivek Kumar and Rathod Ravinder

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401102

Open Access

Forecasting of strength and durability properties of High Performance Composites by Artificial Neural Networks (ANN) 01103

Magudeaswaran. P, Vivek Kumar C and Britto Jeyakumar M S

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401103

Open Access

BEHAVIOURAL STUDIES ON TRIPLE BLENDED FOAM CONCRETE 01104

G.V.V. Satyanarayana and P. Gayathri

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401104

Open Access

Evaluation of Groundwater Quality Of Bachupally, Nizampet And Pragathinagar Village 01105

S. Venkatcharyulu, Rathod Ravinder and Y. Kamala Raju

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401105

Open Access

Study on effect of strength and durability parameters and performance of Self Compacting Concrete replacement with GGBS at different dosages 01106

A Vittalaiah, Rathod Ravinder and C Vivek Kumar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401106

Open Access

RCC Highrised Residential Buildings its Influence on Earthquake Loads 01107

Y. Kamala Raju, G.V.V. Satyanarayana and G. Arun Sai

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401107

Open Access

PERFORMANCE OF CONCRETE BY USING HYPO SLUDGE AS A MINERAL ADMIXTURE 01108

V. Mallikarjuna Reddy and B. Sharada

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401108

Open Access

High Volume Fly Ash Self Compacting Concrete with Lime and Silica Fume as Additives 01109

C Chandana Priya, M V Seshagiri Rao, V Srinivasa Reddy and S Shrihari

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401109

Open Access

Effect of basalt fibre on the mechanical properties of M70 grade high performance concrete 01110

V Ram Singh, V Srinivasa Reddy, S Shrihari and T Srikanth

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401110

Open Access

A Review of mathematical models for prediction of Stress-strain and moment –curvature behaviour in concrete 01111

Y Shashank Babu, V Srinivasa Reddy, Raju S P V and M V Seshagiri Rao

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401111

Open Access

Effect of Organic and Inorganic Corrosion Inhibitors on Strength Properties of Concrete 01112

V Srinivasa Reddy, Thoodi Prashanth, S P Raju V and P Prashanth

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401112

Open Access

Bio-Mediated Sandy Soil Stabilization Using Urease Enzymatic Calcite Precipitation: A Sustainable Solution 01113

V Srinivasa Reddy, K Hema Latha, Ravulaparthi Sudha Lahari and M V Seshagiri Rao

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401113

Open Access

Assessment of Corrosion Inhibiting Efficiency of Microbes Induced Concrete 01114

V Srinivasa Reddy, Polina VVSSSR Krishna, G Sai Karthik and S Shrihari

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401114

Open Access

Pore Structure Analysis of various water-binder ratios Ternary blended Concrete made with 01115

D Adinarayana, P Srinivasa Rao and V Srinivasa Reddy

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401115

Open Access

Traffic volume Analysis of Newly Developing semi-urban Road 01116

S. Venkatcharyulu and V. Mallikarjunareddy

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401116

Open Access

Spatial Day Light Autonomy and Energy Analysis of a Residential Building for Different Climatic Conditions and Window-to-Wall Ratios 01117

Dr. R. Vijay Kumar, Sandeep Kumar N, Narsimha K, Shiva Ram Reddy K and Vamsee Krishna E

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401117

Open Access

Experimental Study on Compressive Strength, Water Retention And Water Absorption of self-curing Concrete With Different Curing Conditions 01118

S.P.Raju. V, Martha Saikumar, T. Srinivas, G.V.D.N. SaiVamsi and A. Vijaya Srinivas Srikar

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401118

Open Access

Model Study of Decision Support System for Water Management 01119

S. Venkatcharyulu and Dr.G.K. Viswanadh

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401119

Open Access

Analysis and Design of RC Structure with Light Weight Bricks Using Etabs 01120

Imadabathuni Chandana, CH Shailaja, G Ravalika and A Varsha

Published online: 19 August 2020

DOI: https://doi.org/10.1051/e3sconf/202018401120

E3S Web of Conferences

Volume 184 (2020)

2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)

Statement of Peer review

Preface 00001

Formation of Multiple Phase Microstructure and Wear Investigation on Treated AISI 904L SS by Low Temperature Ion Nitriding Process 01001

Structure and Topography Modifications of Treated AISI 316LN Stainless Steel Surfaces after Friction in Dry Sliding Contact by Case Hardening Process 01002

New Insights of Wear Behavior Analysis on Low Temperature Treated AISI 253MA Stainless steel Material by Gas Nitriding Process 01003

Anisotropy Study of Inconel 718 alloy at Sub-Zero temperatures 01004

Influence of Process Parameters on Physical and Mechanical Parameters of Friction Surfaced Deposits on Low Carbon Steel 01005

Investigation of Microstructure and Mechanical Properties of Austenite Stainless Steel 304 during Tempering and Cryogenic Heat Treatment 01006

IOT based solar energy prophecy using RNN architecture 01007

Processing parameters Optimization of Injection Moulding in DN20 Vent of Water Meter Manufacturing 01008

Dynamics and an efficient malware detection system using opcode sequence graph generation and ml algorithm 01009

Driving license detection using QR code 01010

A Comparative Study using Feature Selection to Predict the Behaviour of Bank Customers 01011

Comparison of GAN, SIC, SI Technology for High Frequency and High Efficiency Inverters 01012

Taguchi Optimisation In Machining EN18 Using Coated Tool Under Dry and MQL Condition 01013

Experimental Studies on Machining EN45 Steel under Dry and MQL using Uncoated Inserts 01014

Impact of Nano additives on optimized Mahua Bio-diesel Performance 01015

A Fractional Order Control Strategy for LFC via Big Bang Big Crunch & Grey Wolf Optimization Algorithms 01016

Role of Big Data Analytics in Power System Application 01017

Investigation of Mechanical Properties of AISI 316 Stainless Steel by Carbonitriding Process 01018

Improving the Mechanical Properties of AISI 2205 Duplex Stainless Steel by Cryogenic Treatment Process 01019

Assessment of Properties on AISI430 Ferritic Stainless Steel by Nitriding process 01020

Evaluation of properties of AISI 431Grade Stainless Steel by Vacuum Annealing Process 01021

Assessment of AISI 431Grade Stainless Steel properties by Vacuum Tempering Process 01022

IMPROVEMENT OF CHARACTERISTICS OF AISI 310 GRADE STAINLESS STEEL MATERIAL BY CARBURIZING 01023

Wear Characteristics of AISI 310 Grade Stainless Steel Material by Carbonitriding Process 01024

Analog to Digital Converters (ADC): A Literature Review 01025

Experimental investigations and optimization of process parameters of meshed-wick heat pipe 01026

Turbulent fluid flow and heat transfer analysis of heated rectangular blocks encountered in electronics enclosures 01027

Optimization of Metal Inert Gas Welding Process during Joining of Structural Steels- An Overview 01028

Effect of permeability on GFRP laminate produced by VARTM process 01029

A Review on Comparison of Mechanical Properties of Dissimilar Steels Welded By TIG and MIG 01030

A comprehensive study to select suitable method to enhance mechanical properties during 3D printing of metallic materials 01031

FEM Analysis of Robotized Arc Welded Joint 01032

A Review on Mechanical and Thermal Properties of Aluminum Metal Matrix Composites 01033

Scope of Intelligence Approcahes for Unit Commitment Under Uncertain Sustainable Energy Environment For Effective Vehicle To Grid Operations-A Comprehensive Review 01034

Design of Flying Capacitor Multilevel Inverter for Solar Energy Applications 01035

Formability Studies of Automotive Aluminium Alloy Sheet series: A Review 01036

Optimizing Tool Path Sequence Of Plasma Cutting Machine Using TSP Approach 01037

Design of TID controller based on firefly algorithm for controlling the speed of a D.C. Motor 01038

Optimization of post weld heat treatment cycle of fiber laser welded bainitic steel 01039

Weldability, Mechanical Properties and Microstructure of Nickel Based Super Alloys: a review 01040

Performance Investigation of Grid-Connected DFIG using Integrated Shunt Active Filtering Capabilities 01041

Sustainability aspects in the warm forming of tailor welded blanks 01042

Relay Feedback Identification based Load Frequency Control and Controller Design 01043

A Review on Intelligent Fault Detection in Rolling Element Bearings 01044

Powder Metallurgy Techniques for Titanium Alloys-A Review 01045

Optimization of TriboelectricNanogenerator for Small Power Electronics 01046

Emerging trend in manufacturing of 3D biomedical components using selective laser sintering: A review 01047

Taguchi optimisation of Turning Inconel 600 under dry and MQL condition using uncoated Tool 01048

An Approach for Future-Oriented Framework Design: A Tool for Design Research 01049

A Survey on a Nonlinear Regression Application to Machine Learning Techniques for Geomagnetic Data Reconstruction Processing 01050

Study and Optimisation of Process Parameter in Turning Of EN 45 - Spring Steel Material Under Dry And MQL Conditions 01051

A Survey of DDOS Attacks Using Machine Learning Techniques 01052

A Survey on Big Five Personality Traits Prediction Using Tensorflow 01053

CFD Analysis of a Solid Propellant Retro Rocket Motor using Ansys Fluent 01054

Adoption of Multilevel Inverter based Dynamic Voltage Restorer for Power Quality Improvement with Adjustable DC-Link 01055

A review on Mechanism of fluid flow and Transfer of Heat in Closed Loop Pulsating Heat Pipe 01056

DSP based Voltage Source Inverter for an application of Induction Motor control 01057

Aerodynamic analysis of railway wagon on drag coefficient 01058

Structural Health Monitoring (SHM) of Machine Using a Combination of Non-Destructive Testing for Heavy Manufacturing Industry 01059

Experimental investigation in machining EN18 using coated tool under dry and MQL condition 01060

A Survey on Hybrid Machine Translation 01061

Functional safety requirements of traction inverter in accordance to ISO 26262 01062

Review on Laminated Busbars used in High Frequency Inverters 01063

CODE2VEC Based Cognitive Agent System to Retrieve Relevant Code Component from Repository 01064

Speed Control of Dual Induction Motor Using Five Leg Inverter 01065

Smart Privacy Protection for Location-Based Services using Queueing Modelling 01066

A Role of cryogenic in Wire cut EDM process 01067

ANN based Battery Health Monitoring - A Comprehensive Review 01068

An Effective Solution to Single-Area Dynamic Dispatch Using Improved Chimp Optimizer 01069

A New Solution to Profit Based Unit Commitment Problem Considering PEVs/BEVs and Renewable Energy Sources 01070

A Cost Effective Solution to Security Constrained Unit Commitment and Dispatch Problem using Hybrid Search Algorithm 01071

Dynamic force signal analysis in dry finish turning of Aluminium metal matrix composites 01072

Model Predictive Controller based Unified Power Quality Conditioner for Voltage Regulation Studies in 33- Bus Closed Loop Distribution System 01073

Configurations and Control Strategy of a Single Stage Grid Connected PV System 01074

7-Level Semi Cross Switched Multilevel Inverter Fed Induction Motor Drive 01075

2^nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)