| Issue |
E3S Web Conf.
Volume 184, 2020
2nd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED 2020)
|
|
|---|---|---|
| Article Number | 01081 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/e3sconf/202018401081 | |
| Published online | 19 August 2020 | |
Stress-Strain behaviour of basalt fibre reinforced concrete
1 Research Scholar of Civil Engineering, K L University, Andhra Pradesh, India
2 Department of Civil Engineering, K L University, Andhra Pradesh, India
3 Professor, Department of Civil Engineering, GRIET, Hyderabad, India
4 B.Tech Student, Department of Civil Engineering, GRIET, Hyderabad, India
This paper prophesies the stress strain behaviour of M30 grade concrete reinforced with basalt fibres of length 12 mm, 36 mm and 50 mm of amounts 0.4%, 0.4% and 0.3% by volume of concrete respectively. Modulus of elasticity and toughness of M30 grade basalt fibre reinforced concretes are also evaluated. It was found that BFRCC mixes show good resistance to impact and has superior dissipation capacity. The optimal basalt fibre volume fraction is 0.3% and length is 50 mm. For this case, toughness index and energy absorbed at fracture have considerably enhanced. With the volume fraction of basalt fiber exceeding the optimum volume fraction, the mechanical properties of basalt fiber are weakened.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.