| Issue |
E3S Web Conf.
Volume 185, 2020
2020 International Conference on Energy, Environment and Bioengineering (ICEEB 2020)
|
|
|---|---|---|
| Article Number | 01075 | |
| Number of page(s) | 5 | |
| Section | Energy Engineering and Power System | |
| DOI | https://doi.org/10.1051/e3sconf/202018501075 | |
| Published online | 01 September 2020 | |
Fault ride-through control strategy of H-bridge cascaded energy storage system
1 National Key Laboratory on Operation and Control of Renewable Energy and Energy Storage
2 China Electric Power Research Institute Co., Ltd, Nanjing, Jiangsu 210003
The cascaded energy storage system has received extensive attention in areas such as new energy consumption, maintaining stable operation of the power grid, and supporting black start due to its advantages such as high access voltage level, large single unit capacity, and fast dynamic response rate. This paper aimed to improve the fault ride-through capability of the cascaded energy storage system, and proposed a fault ride-through control method. Firstly, the mathematical model of the cascaded energy storage system was established, and then the rapid detection method of the abnormal state of the power grid and the fault ride-through method were analyzed, and finally the simulation analysis was performed. The feasibility and correctness of the control method can be seen from the experiments.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.