| Issue |
E3S Web Conf.
Volume 192, 2020
VIII International Scientific Conference “Problems of Complex Development of Georesources” (PCDG 2020)
|
|
|---|---|---|
| Article Number | 01014 | |
| Number of page(s) | 5 | |
| Section | Geotechnical and Geomechanical Problems of Development of Mineral Resources | |
| DOI | https://doi.org/10.1051/e3sconf/202019201014 | |
| Published online | 30 September 2020 | |
Influence of the parameters of the layer of ore being brought down on its freezing and losses during the face ore draw
1
Mining Institute of the North, Siberian Branch, Russian Academy of Sciences, laboratory of problems of rational development of mineral resources, 677980, 43 Lenina Ave., Yakutsk city, Russia
2
D.A. Kunaev mining institute, laboratory of comprehensive exploration of mineral resources, 050046, 191 Abaia Ave., Almaty city, Republic of Kazakhstan
* Corresponding author: petrovdn74@mail.ru
Application of mining systems with ore caving and adjacent strata, which do not entail high expenditures on delivery of freed ore and rock pressure management, allows to considerably increase efficiency of underground mining of ore deposits in the cryolithic zone. However, their use where permafrost formations are prevalent, requires taking into account factors complicating mining operations, in particular, the congealing of broken ore in the stoping zone. In order to assess the impact of thermal and humidity conditions on the completeness of reserves recovery, a study was carried out to determine the dependence between the volume of losses of broken ore prone to congealing and the width and height of the layer being brought down. Experimental studies were conducted by physical simulation in a cryo chamber on a laboratory bench. The ore drawing was conducted in a uniform sequence at the temperature in the stoping zone of minus 5 ˚C. The final parameter to be determined the loss of ore prone to congealing, was defined as the difference between the mass of ore in the block and the mass of ore drawn. It has been established that the losses of the broken ore due to congealing increase significantly when the depth of the layer being freed decreases and the width increases.
The established patterns of influence of parameters of a beaten layer on losses of ore mass will be used during development of recommendations on technology of drawing of ore mass prone to congealing in the negative thermal conditions of underground mines of a cryolithic zone.
Key words: underground mining / cryolithic zone / caving / drawing / congealing / parameters of broken-up layer / ore losses
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.