Issue |
E3S Web Conf.
Volume 123, 2019
Ukrainian School of Mining Engineering - 2019
|
|
---|---|---|
Article Number | 01015 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/e3sconf/201912301015 | |
Published online | 22 October 2019 |
Muck drawing by inclined two-dimensional flow
Kryvyi Rih National University, Department of Underground Mining of Useful Mineral Deposits, 11 Matusevycha St., 50027 Kryvyi Rih, Ukraine
* Corresponding author: elenakalinichenko_v@mail.ru
The work aims at studying and developing an efficient option of layer-by-layer muck drawing from the “dead area” of the footwall for the account of forming an inclined limiting contact of the muck ore with the unmined ore massif. The paper presents a detailed technical and economic analysis of factors and conditions impacting efficiency of muck drawing from the footwall “dead area”. The conducted studies of muck drawing on laboratory models considering a modeling scale enable determining optimal parameters of the layer-by-layer ore breaking and, further on, conduct a layer-by-layer muck drawing from the footwall “dead area” with minimum losses and dilution. The article determines regulations of the broken ore layer width considering possible obtaining of maximum muck values. On the basis of the conducted studies there are suggested optimal options of the technology of layer-by-layer breaking and drawing of the muck when forming an inclined limiting contact of the muck ore with the breakage face. The article proves practicability of breaking by inclined layers with formation of a limiting contact of the muck ore with the breakage face and suggests implementation of layer-by-layer muck drawing by an inclined flow.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.