| Issue |
E3S Web Conf.
Volume 194, 2020
2020 5th International Conference on Advances in Energy and Environment Research (ICAEER 2020)
|
|
|---|---|---|
| Article Number | 01002 | |
| Number of page(s) | 4 | |
| Section | Energy Engineering and Energy Development and Utilization | |
| DOI | https://doi.org/10.1051/e3sconf/202019401002 | |
| Published online | 15 October 2020 | |
Exergy analysis of the multi-stage slag waste heat recovery system
1 School of Metallurgy, Northeastern University, Shenyang 110819, Liaoning, China
2 Shenyang Metrology Testing Institution, Shenyang 110179, Liaoning, China
* Corresponding author: duanwenjn@163.com
Based on the black-box model, this paper analyzed the multi-stage slag waste heat recovery system. The exergy efficiency, the exergy loss coefficient and the exergy loss rate were adopted as evaluation indexes to investigate the energy consumption and the weakness of the system. Meanwhile, the performance of waste heat recovery was analyzed by comparing the comprehensive exergy efficiency between the system and other conventional waste heat recovery methods. The results showed that the comprehensive exergy efficiency of the system reached 75.75%, which was much higher than other methods, and the weakness of the system was the subsystem of waste heat boiler. In general, the system recovered the slag waste heat effectively and converted coal to clean syngas through gasification reaction, which had incredible potential in energy saving, emission reduction and consumption reduction.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.