| Issue |
E3S Web Conf.
Volume 194, 2020
2020 5th International Conference on Advances in Energy and Environment Research (ICAEER 2020)
|
|
|---|---|---|
| Article Number | 01014 | |
| Number of page(s) | 4 | |
| Section | Energy Engineering and Energy Development and Utilization | |
| DOI | https://doi.org/10.1051/e3sconf/202019401014 | |
| Published online | 15 October 2020 | |
The Influence of Pipe Types on The Thermal Performance of Flat-plat Closed Loop Pulsating Heat Pipe
1 School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an, China, 710049
2 School of Environment and Energy Engineering, Beijing University of Civil Engineering and Architecture, Beijing, China, 100044
* Corresponding author: wqp@mail.xjtu.edu.cn
Flat-plat pulsating heat pipes (FCLPHPs) have a great potentiality in electronic cooling field and space application. In this investigation, three FCLPHPs (L1, L2, and L3) were built to study the influence of cross section shapes on the heat transfer performance of FCLPHP. One (L1) of them has asymmetric pipe, the others (L2, L3) have symmetric pipes. The results indicate that the FCLPHP L1 has the best heat transfer performance. Compared with the FCLPHPs L2 and L3, the start-up time reduces by 64% and the thermal resistance reduces by at most half respectively.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.