Issue |
E3S Web Conf.
Volume 205, 2020
2nd International Conference on Energy Geotechnics (ICEGT 2020)
|
|
---|---|---|
Article Number | 09006 | |
Number of page(s) | 5 | |
Section | Minisymposium: Engineered Geomaterials for Energy and Environmental Sustainability (organized by Alessandro Rotta Loria) | |
DOI | https://doi.org/10.1051/e3sconf/202020509006 | |
Published online | 18 November 2020 |
Laboratory tests on arsenic leaching from excavated shale rock by elevated temperatures
1Kyoto University, Graduate School of Global Environmental Studies, Kyoto, Japan
* Corresponding author: takai.atsushi.2s@kyoto-u.ac.jp
This manuscript focuses on the leaching of geogenic arsenic (As) from shale rock at different temperatures. In Japan, the utilisation of geogenic contaminated soils and rocks for construction such as in embankment is much encouraged. Therefore, when applying thermally active geo-systems such as thermal energy storage and ground-source heat pump, which are associated with ground temperature changes, we need to know its impact on the leaching behaviour of such contaminated geomaterials. In this study, the leaching of chemicals from an excavated shale rock containing geogenic As was assessed using a shaking and non-shaking batch test. In those experiments, different temperatures up to 40 ºC and contact times ranging from 6–360 h were employed. Overall, it was found out that more As was leached with elevated temperatures and its concentration was notably higher under the non-shaking condition. Further, under the non-shaking condition, its concentration was highest at 40 ºC with contact time of 360 h, whereby ca. 0.06 mg/L As was leached, which is 6 times the permissible limit of 0.01 mg/L in Japan.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.