| Issue |
E3S Web Conf.
Volume 217, 2020
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2020)
|
|
|---|---|---|
| Article Number | 04008 | |
| Number of page(s) | 7 | |
| Section | Environmental Monitoring and Protection | |
| DOI | https://doi.org/10.1051/e3sconf/202021704008 | |
| Published online | 14 December 2020 | |
Improvement of environmental indicators of coal energy and agricultural production due to the integration and diversification of these industries
1 Don State Technical University, Gagarin sq., 1, Rostov-on-Don, 344003, Russia
2 Southern Federal University, st. Bolshaya Sadovaya, 105/42, Rostov-on-Don, 344006, Russia
* Corresponding author: rudenko-centr@mail.ru
At present, there is extensive experience in the use of sulfuric acid ameliorant for soils with soda type of salinity. The authors found that as a result of using a weak solution of sulfuric acid on soils containing sodium and hydrocarbonates in their salt composition, their agrochemical characteristics are significantly improved. The article presents the results that show that the production of fertilizers and ameliorants from the waste of energy enterprises will increase their environmental safety. The use of sulfur oxides captured from the flue gases of coal-fired energy enterprises as a raw material for the production of sulfuric ameliorant will allow solving a double task: to reduce pollution of the zone of influence of enterprises and improve the condition of lands with soda salinization.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.