| Issue |
E3S Web Conf.
Volume 218, 2020
2020 International Symposium on Energy, Environmental Science and Engineering (ISEESE 2020)
|
|
|---|---|---|
| Article Number | 01029 | |
| Number of page(s) | 5 | |
| Section | Research on Energy Technology Application and Consumption Structure | |
| DOI | https://doi.org/10.1051/e3sconf/202021801029 | |
| Published online | 11 December 2020 | |
Research on Management Strategy of Cost-based Intelligent Manufacturing System
Ocean University of China, University of Waterloo
15563100128@163.com, j7che@uwaterloo.ca
The reliability, efficiency and accuracy of CNC machines as work cells of intelligent manufacturing systems (IMS) are criteria to measure the processing level of the latter. In order to improve the reliability of the IMS and reduce the maintenance cost, very sound preventive maintenance and management strategies concerning the CNC machines should be defined. We realized a parameter estimation of our reliability model for CNC machine units in an IMS environment, carried out a linear correlation test and a distribution fitting test for the model and obtained the failure distribution function and failure rate function. We then built a post-failure maintainability model and realized a maintainability evaluation. Following the above analyses, we built a cost-based preventive maintenance cycle model and obtained its optimal value by using the particle swarm optimization (PSO) algorithm. This research and its result can on the one hand guide the setting-up of preventive maintenance planning and management schemes and on the other hand reduce the production cost and enhance enterprise efficiency.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.