| Issue |
E3S Web Conf.
Volume 229, 2021
The 3rd International Conference of Computer Science and Renewable Energies (ICCSRE’2020)
|
|
|---|---|---|
| Article Number | 01033 | |
| Number of page(s) | 10 | |
| DOI | https://doi.org/10.1051/e3sconf/202122901033 | |
| Published online | 25 January 2021 | |
Elaboration of TiO2 Ultrafiltration Membrane Deposited on Moroccan Sahara Clay
Laboratory of Biotechnology, Materials and Environment University Ibn Zohr, Agadir, Morocco
* Corresponding author: saffaj@gmail.com
In this work, the porous ceramic multilayer ultrafiltration membrane is developed. Macroporous support was formed by extrusion of ceramic paste derived from natural Moroccan Sahara Clay. The microporous interlayer was then performed by slip casting from zirconia commercial powders and finally the active ultrafiltration toplayer was obtained by solgel route using TiO2 sol. The performance of TiO2 ultrafiltration membrane was evaluated by pores diameter, thickness of the top layer, water flux, and molecular weight cut off (MWCO). The water permeability measured for this composite membrane is 9.051 l/(m2·h·bar), the thickness is around 900nm, the pore diameter is centered near 7nm and the MWCO was about 5000Da.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.