| Issue |
E3S Web Conf.
Volume 288, 2021
International Symposium “Sustainable Energy and Power Engineering 2021” (SUSE-2021)
|
|
|---|---|---|
| Article Number | 01022 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202128801022 | |
| Published online | 14 July 2021 | |
On the influence of electric power quality on the decimation of currents and voltages of utility frequency
Nizhny Novgorod State Technical University n.a. R.E. Alekseev, Minin str., 24, Nizhny Novgorod, Russia
* Corresponding author: sevosaa@gmail.com
The electric power industry cannot develop without analyzing the factors that affect the shape of currents and voltages when determining the parameters of the electric network mode in the context of the introduction of modern means of intellectualization into the structure of power supply systems. The share of equipment affecting the electric power quality reaches 90% in modern electrical networks. This leads to the appearance of noise in the network that reduces the quality of electrical energy, voltage distortion by higher harmonic components in particular, and affects the adequacy of the parameters of the electrical network adopted by automatic control devices. The article presents the results of digital signal processing containing distortions in the form of a harmonic component with a decrease in the sampling frequency. It is shown that a decrease in the sampling frequency does not exclude the effect of higher harmonics on the result of processing signals, including high-frequency distortions.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.