| Issue |
E3S Web Conf.
Volume 299, 2021
4th Annual International Conference on Energy Development and Environmental Protection (EDEP 2021)
|
|
|---|---|---|
| Article Number | 03010 | |
| Number of page(s) | 9 | |
| Section | Development and Utilization of Resources | |
| DOI | https://doi.org/10.1051/e3sconf/202129903010 | |
| Published online | 05 August 2021 | |
Study on the Influence of the New Type of Powder Metallurgy Ti-Al-Nb Alloy Hot Press Sintering Process on the Microstructure
Beijing Institute of Aeronautical Materials, Beijing, 100095, China
* Corresponding author: fs107114@126.com
Based on the hot-pressing sintering process, the kinetics of hot-pressing sintering crystal grain growth and the hot-pressing sintering densification kinetics, the mixing ratio of the raw material powder and the hot-pressing sintering system are designed. The pressure is maintained at 30 MPa from the temperature rise to the end of the sintering process, and wait until the temperature reaches the corresponding hot pressing sintering temperature (1200°C~1400°C), keep the corresponding time for 1.5h~4.5h, stop heating and depressurize, and the alloy billet is cooled to room temperature with the furnace. The main phases of Ti2AlNb powder and hot pressing sintering process are TiAl and Ti3Al.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.