Open Access
| Issue |
E3S Web Conf.
Volume 299, 2021
4th Annual International Conference on Energy Development and Environmental Protection (EDEP 2021)
|
|
|---|---|---|
| Article Number | 03010 | |
| Number of page(s) | 9 | |
| Section | Development and Utilization of Resources | |
| DOI | https://doi.org/10.1051/e3sconf/202129903010 | |
| Published online | 05 August 2021 | |
- Mao Yong, Li Shiqiong, Zhang Jianwei, Peng Jihua, Zou Dunxu, Zhong Zengyong. Acta Metall Sinica, 2000, 36(2): 135–140. [Google Scholar]
- Zhang Yonggang, Han Yafang, Chen Guoliang, Guo Jianting, Wan Xiaojing, Editorin-Chief Feng Di, Intermetallic Structural Materials, National Defense Industry Press, January 2001 [Google Scholar]
- C.H. Koo and T.H. Yu. Pack cementation coatings on Ti3Al-Nb alloys to modify the high-temperature oxidation properties. Surface and Coatings Technology, 126, 2000, p171–180. [CrossRef] [Google Scholar]
- Y. W. Kim, D. M. Dimiduk. Progress in the understanding of gamma titanium aluminides, JOM, 43(8), 1991, p40–47. [CrossRef] [Google Scholar]
- C. Koepee, A. Bartels, J. Seeger and H. Mecking. General aspects of the thermomechanical treatment of two-phase intermetallic TiAl compounds. Metallurgical and Materials Transaction A, 24(8), 1993, p1795–1806. [CrossRef] [Google Scholar]
- W. Gao, Z. Li, D. Zhang. A new high-temperature, oxidation-resistant Ti-based materials. Oxidation of Metals, 57(1-2), 2002, p99–114. [CrossRef] [Google Scholar]
- S. L. Semiatin. Wrought processing of ingot-metallurgy gamma titanium aluminide alloys [A]. Kim Y. W., Wagner, R., Yamaguchi, M., ed. Gamma Titanium Aluminides [C]. TMS, Wrarrendale, PA, 1995: p509–524. [Google Scholar]
- Y.W. Kim. Intermetallic alloys based on gamma titanium aluminum [J]. JOM. 1989, 41(7): 24. [CrossRef] [Google Scholar]
- C. Scheu, E. Stergar, M. Schober, L. Cha, H. Clemens, A. Bartels, F.P. Schimansky, A. Cerezo. High carbon solubility in a y-TiAl-based Ti-45Al-5Nb-0.5C alloy and its effect on hardening [J]. Acta Materialia. 2009, 57: 1504–1511. [CrossRef] [Google Scholar]
- Y.Y. Chen, H.Z. Niu, F.T. Kong, S.L. Xiao. Microstructure and fracture toughness of a ß phase containing TiAl alloy [J]. Intermetallics. 2011,19: 1405–1410. [CrossRef] [Google Scholar]
- D. Vujic. Effect of rapid solidification and alloying addition on lattice distortion and atomic ordering in L10 TiAl alloys and their temporary alloys [J]. Metall Trans A. 1988, 19(10): 2445. [CrossRef] [Google Scholar]
- T. Kawabata, T. Abumiya, T. Kami, et al. Mechanical properties and dislocation structures of TiAl single crystals deformed at 4.2-293K [J]. Acta Metall Mater. 1990, 38(8): 1381–1393. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.