| Issue |
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|
|
|---|---|---|
| Article Number | 01019 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/e3sconf/202130901019 | |
| Published online | 07 October 2021 | |
Optimization of Milling Process by Taguchi-PSI Method
1 Vinh Long University of Technology Education, Vietnam
2 University of Economics - Technology for Industries, Vietnam
3 Nguyen Tat Thanh University, Ho Chi Minh City, Vietnam
4 Thai Nguyen University College of Economics and Techniques
5 Thai Nguyen University of Technology, Thai Nguyen, Vietnam
* Corresponding author: quocdung@tnut.edu.vn
060A4 steel (Chinese standard) is a steel with good machinability, which is very popularly used in mechanical engineering. Therefore, the study of solutions for improvement of quality and productivity when machining this steel type has great technical and economic significance. In this study, the multi-objective optimization process has been performed when milling this steel type on a vertical milling machine. The cutting tool is a face milling cutter made of High Speed Steel (HSS) material. The effect of spindle speed, feed rate, and cutting depth on surface roughness has been found. The combination of the Taguchi method and PSI method has been applied to determine the optimal value of three input parameters to simultaneously ensure the two criteria of the minimum surface roughness and the maximum Material Removal Rate (MRR). The works which will be done by the authors of this article in the near future has also been presented in the last part of this study.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.