Issue |
E3S Web Conf.
Volume 309, 2021
3rd International Conference on Design and Manufacturing Aspects for Sustainable Energy (ICMED-ICMPC 2021)
|
|
---|---|---|
Article Number | 01010 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/e3sconf/202130901010 | |
Published online | 07 October 2021 |
Optimization Study on Turning Process by Using Taguchi-copras Method
1 Ha Noi University of Industry, Vietnam
2 University of Economics - Technology for Industries, Vietnam
3 Nguyen Tat Thanh University, Ho Chi Minh City, Vietnam
4 Electric Power University, Vietnam
5 Thai Nguyen University of Technology, Thai Nguyen, Vietnam
* Corresponding author: natuan.ck@uneti.edu.vn
In this article, a multi-objective optimization of turning process study is presented. Two output parameters of the turning process taken into consideration are surface roughness and Material Removal Rate (MRR). Taguchi method has been applied to design the experimental matrix with four input parameters including nose radius, cutting velocity, feed rate and cutting depth. Copras method has been employed to solve the multi-objective optimization problem. Finally, the optimal values of the input parameters have been determined to simultaneously ensure the two criteria of the minimum surface roughness and the maximum MRR.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.