Determining soil-deepener the vertical distance from blade to lower suspension point of plug

Bukhara Institute of Natural Resources Management of the National Research University of Tashkent Institute of Irrigation and Agricultural Mechanization Engineers, Bukhara, Uzbekistan

^* Corresponding author: ulugbek.hasanov.1989@mail.ru

Abstract

The technology of intensive treating to soil is used to harvest 2 or 3 times from watered lands. Aggregations of the car–tractor pass many times through the surface of the field as a result of it. As a result, the soil layer surface turns to small pieces of dust, and the condensation of the underground layer empowers. Apart from that, when we treat the soil with a plug in the same depth for many years, extremely condensed compensation of plug appears under the field, and it hinders the improvement of plants' roots and the being soaked process of water. After that, the rate of productivity decreases. To solve this problem, economical ways of treating the soil and protective technologies for soil are spreading worldwide. To eliminate these shortcomings, in this article, the working process is improved in the process of plowing the land. To ensure that the plug with a submersible sink to a specified depth and runs smoothly at this depth, the vertical distance from the blade of the submersible to the lower hanging point of the plug and the vertical distance of the submersible plug in the longitudinal - vertical plane the results of theoretical studies on determining the forces affecting the plug are described.