| Issue |
E3S Web Conf.
Volume 264, 2021
International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO - 2021)
|
|
|---|---|---|
| Article Number | 04036 | |
| Number of page(s) | 11 | |
| Section | Mechanization, Electrification of Agriculture and Renewable Energy Sources | |
| DOI | https://doi.org/10.1051/e3sconf/202126404036 | |
| Published online | 02 June 2021 | |
Traction resistance of the combined machine plough
1 Karshi Engineering Economic Institute, Karshi, Uzbekistan
2 Russian State Agrarian University - Moscow Timiryazev Agricultural Academy, Moscow, Russia
* Corresponding author: dchuyanov1@mail.ru
Subsoils are widely used on tillage and combination machines. The tiller of the combined machine for preparing the soil for sowing melons and gourds carries out strip loosening of the subsoil layers. The study aims to theoretically determine the traction resistance of a soil deepener of a combined machine for preparing the soil for sowing melons and gourds. The study uses the basic provisions of mathematics, theoretical mechanics, and agricultural mechanics. In studies, it is assumed that the destruction of the soil under the influence of the drill bit occurs by separation. The total traction resistance of the subsoiler was determined as the sum of the resistance of the rack and the bit. An analytical expression has been obtained to determine the traction resistance of a tilting machine with an inclined stand, depending on its design, technological parameters, and the physical and mechanical properties of the soil. As a result of theoretical studies, it was found that the traction resistance of the soil deepener is mainly influenced by its design parameters, the depth of soil cultivation, the physical and mechanical properties of the soil, and the speed of the machine.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.