| Issue |
E3S Web Conf.
Volume 376, 2023
International Scientific and Practical Conference “Environmental Risks and Safety in Mechanical Engineering” (ERSME-2023)
|
|
|---|---|---|
| Article Number | 01095 | |
| Number of page(s) | 6 | |
| Section | I Environmental Risks and Safety in Mechanical Engineering | |
| DOI | https://doi.org/10.1051/e3sconf/202337601095 | |
| Published online | 31 March 2023 | |
Design forming tooling for manufacturing parts from sheet blanks using digital technologies
1 Moscow Aviation Institute (National Research University), 4, Volokolamskoe shosse, 125993, Moscow, Russia
2 Voronezh State Technical University, 20-letiya Oktyabrya Street, 84, 394006, Voronezh, Russia
3 Moscow State University of Civil Engineering", 129337, Yaroslavskoe shosse, 26, Moscow, Russia
* Corresponding author: u00781@vgasu.vrn.ru
The paper considers the possibilities of using modern information technologies to solve the problems of ensuring the quality, accuracy of tooling, reducing the time and labor intensity of manufacturing, improving its design processes through the use of an electronic model of a part and a technological electronic model of tooling in technological processes of shaping parts on equipment with numerical control.
© The Authors, published by EDP Sciences, 2023
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.