| Issue |
E3S Web Conf.
Volume 363, 2022
XV International Scientific Conference on Precision Agriculture and Agricultural Machinery Industry “State and Prospects for the Development of Agribusiness - INTERAGROMASH 2022”
|
|
|---|---|---|
| Article Number | 04001 | |
| Number of page(s) | 9 | |
| Section | Environmental Education and Digital Solutions. Environmentally Responsible Behavior | |
| DOI | https://doi.org/10.1051/e3sconf/202236304001 | |
| Published online | 14 December 2022 | |
The use of the digital twin in the design of a prefabricated product
1 Moscow Aviation Institute (National Research University), Volokolamskoe shosse, 4, 125993, Moscow, Russia
2 Voronezh State Technical University, 20th Anniversary of October, 84, 394006, Voronezh, Russia
3 Moscow State University of Civil Engineering, Yaroslavskoe sh., 26, 129337, Moscow, Russia
* Corresponding author: u00781@vgasu.vrn.ru
This paper discusses the process of creating a digital twin of a product, which is a virtual model of a mechanical connection. The modeling was carried out using the Pro/ENGINEER software, which allows building a three-dimensional model of the product assembly process, which is a set of three-dimensional electronic models of the product, equipment and tools. The models include a mathematical description of the geometric, physical-mechanical and technical parameters of the objects under consideration. It is shown that it is the formation of a triad of electronic models: product-man-equipment in the considered area of computer-aided design of technological processes for the implementation of mechanical connections that allows modeling with the necessary accuracy and adequacy.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.